I believe there are many friends like me, I only dare to buy a new car, but I don’t dare to choose a used car, because the water inside is too deep. Perhaps look a very new car, which is likely to be hidden under the table, which is likely to be an accident vehicle or a water-related car. Although there are many ways to teach everyone to distinguish these used cars, after all, we are not experts, there are many problems that there is no way to discover directly.

For example, an accident car. Perhaps the car was hit into a piece, but after the maintenance master’s sheet metal paint, appearance looks almost exactly the new car, just look at the eyes, it is no way to distinguish it. But if you have the following artifacts, then the repairing car, it is easy to be able to be seen by you.

二手车躲坑神器,世达测厚仪测评

This artifact is a digital thickness gauge 05262 from the SATA World tool. This time I experience the high-profile version, with color screen, charging and speech broadcast, using it to easily identify the thickness of the surface of the object surface, and can automatically identify the bottom material, thereby detecting in different ways, easy to avoid the second-hand car Deep pit.

二手车躲坑神器,世达测厚仪测评

However, I believe that many users have heard such something for the first time, then how is it used? What is the effect of use? How to use it to identify a two-hand car? And listen to me one by one.

There is a storage bag with a storage package in the package of the Shida Tools Digital Thickness. It is very convenient to put it in, and there is a manual in the package, charge the charging line, and a metal material used to calibrate. If you don’t understand how to use friends, you can look at the manual first, actually use it very simple.

二手车躲坑神器,世达测厚仪测评

The appearance of the digital thickness gauge of the World Tool is like a reading table. There is a square screen above, the middle is four buttons, and the bottom is the probe. Information, material, numerical value, etc. can be displayed in the screen. The digital thickness gauge of the World Tool does not turn off the button, and it will automatically turn on the probe.

The use of the digital thickness instrument of the world tool is very simple, just like a electric pen, when you use your hand to pinch the projections, press the probe to press the paint surface on the car.

二手车躲坑神器,世达测厚仪测评

After pressing, the display will display a value, and the voice broadcast will be performed, and the numbers can be found. The material below is displayed below, and the general paint is all iron. And if you don’t display something, you will indicate that the bottom material is not metallic, such as front and rear bumper regions, my car is a plastic shell, which is no value.

二手车躲坑神器,世达测厚仪测评

How do you use the digital thickness gauge of the world tool to judge that this car is repaired? In fact, it is very simple, it is to see the value of the value. The original car paint thickness under normal conditions is between 100-200 μm, and if it is repaired, the thickness will exceed this value. For example, I just measured the front cover thickness of the car. Now the measurement door thickness is 118μm, the difference is almost, so that the car did not have passed.

The thickness of the paint surface of the body will be different. For example, my trunk cover is 130μm. Of course, it may also be more dirty with my car, but if it is repaired, it is likely to be It is easy to distinguish between 300 μm or more. So the digital thickness gauge with the world tool is very easy to identify whether the vehicle is repaired.

二手车躲坑神器,世达测厚仪测评

Of course, the Digital Thickness Gauge of the World Tool is else, such as it can record measurement data, and display it; you can also switch measurement packets, store 32 pieces of data, convenient to measure multiple painted surfaces simultaneously The screen is also supported by rotating, allowing any angle to read the reading. In short, the digital thickness gauge of this world tool is very convenient. Even if you are a small white white, you can use it to avoid the big pit.

二手车躲坑神器,世达测厚仪测评

It is not necessary to doubt the accuracy of the digital thickness gauge of the world tool, because it uses two modes to measure the magnetic material and non-magnetic substrate, which uses the characteristics of magnetic and eddy currents, plus the internal parts of the machine. The intelligent correction, the final acquisition is precise thickness data. It can measure the material of the thickness range of 0-1700 μm, which will be alarm, and the built-in 850mAh lithium battery is built into a long time.

With it, you can do a lot of fun things. For example, I use it to measure my refrigerator paint thickness is 122μm. The thickness of my home security door is 85.8 microns, etc. Is it very magical?

It can be said that this artifact is, even if you still will not use it, go out to the second-hand car market, those sales will never dare to pit you!

You might also enjoy: