Hello everyone, today we will learn to use hook needles to make a handmade belt. First of all, we must prepare the tools: 3.0mm hook needles, marks buckle, sewing, scissors, belt buckles, and wires are suitable for 3.0mm silk cotton, bamboo fiber thread, etc.
First of all, the number of stitches is the length of the waist chain. It must be a strange needle needle, demonstrate 159 stitches, I start a small sample to demonstrate the key point of the hook editing.
Line 1: In the first needle hook 1 needle short needle (a mark on the stitched needle on the stitch of the 1 -lock needle), 1 lock needle, (section of 1 needle, 1 short 1 lock in the lower needle), repeat The hook method in the bracket, the last 1 needle hook 1 short.
Line 2: Turn over, 1 lock needle (plus number buckle), hook 1 needle short needle in the second needle (that is, the gap of the upper lock needle), (1 lock needle, hook in the gap of the upper lock needle 1 short needle), repeat the hook method in the brackets, and the last 1 -lock needle hooks 1 short needle at the mark buckle.
Line 3: Turn over, 1 lock needle (plus number buckle), the hook method is the same as the second line, hook 1 short and 1 lock in the gap of the upper lock needle, and finally hook the short needle on the mark buckle.
We always repeat the rules of the second line to hook, and hook a few lines (the demonstration is 8 lines). When the height coincides with our belt, we finally hook a lap Pull 1 needle, draw 1 needle in each line on the side, and then turn 1 needle in each needle, we will not hook the needle first)
Put this end into the buckle (through the bars under the buckle, then fold it up) to suture. In this way, a simple and easy -hooking belt is completed, and you can also hook a small set of rings on the belt. In this way, when the belt is bored, the excess belt can be inserted into the small set. Try it!