This article mainly uses PS to make a 3D stereo font effect. Aluminum -membrane balloon fonts. Of course, after learning, one of them can be made into an aluminum -membrane balloon effect of other patterns.

Aluminum -membrane balloons are commonly used at the current various celebrations, weddings, and celebrations. This font effect can be used in the decoration effect of indoor and outdoor design in the later stage, and can also be used for poster design.

This article is made of pure effects and does not require external brushes or materials;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Let’s take a look at the effect of making a single word and multi -word effect.

PS教程:铝膜气球3D字,立体字体制作的完整教程

A single -word aluminum film font renderings:

Multi -word aluminum film font renderings:

Now explain the detailed operation steps:

PS教程:铝膜气球3D字,立体字体制作的完整教程

The first part, a single word aluminum film font

PS教程:铝膜气球3D字,立体字体制作的完整教程

1. Enter a symbol or text, we enter a simple question mark here.

(The font is not important, but to make a balloon, it is best to use some fat fonts; if there is no such font, you can also use the existing font to adjust the tool to adjust the tool, and adjust it. This will be used. I won’t say it here.)

2. First make the basic effect of text, set internal shadows and internal glow;

Double-click the font layer, open the layer style, check the inner shadow, the opaque degree of 30%, the angle -100, 6px distance, 24px in size;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Check the inner shadow, with an opaque degree of 63%, and the color is white; the graphic: the method is accurate, the source is medium, the block is 52%, the size is 59px;

PS教程:铝膜气球3D字,立体字体制作的完整教程

The specific size of the hybrid mode and graphic changes depending on the size of the text or patterns, you can adjust it while looking at the effect;

PS教程:铝膜气球3D字,立体字体制作的完整教程

The appropriate meaning is that the outline of the light -emitting area is clear, the shadow area is on the edge, and there are some shadows. You can refer to the figure below.

3. The basic effect of the font is done well. After copying the layer backup, hide the copy layer;

Making unevenness on the edge of the font is more in line with the feeling of aluminum membrane balloon;

This effect only needs to use filter> twist> ripples to adjust the quantity and size.

PS教程:铝膜气球3D字,立体字体制作的完整教程

Generally, the size of the size or the metropolis will be more appropriate. The quantity is adjusted to -36%according to the current situation;

After confirmation, you can get the effect as follows, so whether the basic prototype comes out.

PS教程:铝膜气球3D字,立体字体制作的完整教程

4. After the effect of the filter, the glow in the middle is also a bit shake. This can be directly applied to use the soft edge, 56 size, according to the luminous curve, apply it;

Establish a weap mask, use a white soft edge round drawing pen to make the upper highlight area, and the transparency is set lower to get the effect as shown below.

5. Copy the text layer of the text to hide the copy layer; select the original layer, use the control deformation tool, and expand the edge of the text out;

After adjusting the original layer, the copy layer is displayed. The effect of the two layers is as follows. (At this time, you can see that the underlying adjustment is actually to make the edge of the aluminum film.)

6. Metal luster effect of aluminum film;

PS教程:铝膜气球3D字,立体字体制作的完整教程

First make the metal luster of layer 1, copy layer 1, get layer 1 copy;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Select the 1 copy of the layer, click the filter> Filter Library> Sketch> Chromium Yellow, adjust the details of details, the smoothness can be adjusted to the maximum, and the details are adjusted according to the text size.

PS教程:铝膜气球3D字,立体字体制作的完整教程

After confirmation, the opacity of the layer is 15%-25%;

If you feel that the light and dark in the middle are not round enough, you can use the application tool to wipe it, as shown below.

The basic aluminum film effect of the current layer 1 (bottom layer) is as shown below.

7. Move the previously backup layer (smooth edge) to the top layer;

PS教程:铝膜气球3D字,立体字体制作的完整教程

(This can also be used with a backup layer on the edge of uneven, but the possible effect of smooth edges is better. It is always right to back up a few more, you can look at the effect.)

PS教程:铝膜气球3D字,立体字体制作的完整教程

In order to make the edge and the bottom layer more fit, we need to make an outer glow;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Adjustment of opaqueity is 10%-20%, the color can be directly drawn with the underlying color L by the straw; the graphic: the method is soft, the extension is 74%, the size is 3px;

After confirmation, you can get as shown below.

8. Make an aluminum film metallic luster effect;

PS教程:铝膜气球3D字,立体字体制作的完整教程

This two layers of texture are better, so copy the copy 4 directly twice, namely copy 2 and copy 5;

Select the first layer of copy 2, click the filter> filter library> sketching> chromium yellow gradient, adjust the details and smoothness, the smoothness can be maximized, the details are also adjusted to the maximum, and the opaque is 27%.

Because there is also a layer of luster, in order to be too exaggerated in the overall gloss, the position of the light here is also used to use the application tool to apply it to get the effect as shown below.

PS教程:铝膜气球3D字,立体字体制作的完整教程

Select the second -layer copy 5, click the filter> filter library> sketching> chromium yellow gradient, adjust the details and smoothness, the smoothness can be minimized, the details are also adjusted to the minimum, the opaque is 17%;

PS教程:铝膜气球3D字,立体字体制作的完整教程

In order to highlight the luster of the middle part, it is minimal. This can be adjusted by itself.

After confirming, the single version of the aluminum film balloon is ready, the effect is as shown below.

PS教程:铝膜气球3D字,立体字体制作的完整教程

The final renderings of single -word aluminum film:

The second part, the effect of multi -word aluminum film

PS教程:铝膜气球3D字,立体字体制作的完整教程

1. Enter the text “Happy Wedding”.

PS教程:铝膜气球3D字,立体字体制作的完整教程

2. The inner shadow and inner glow of the layer style. The general settings are the same as a single word. The specifics should be adjusted according to the size of the font to achieve the effect as shown below.

PS教程:铝膜气球3D字,立体字体制作的完整教程

2. Copy the Happy Wedding layer to expand the edge of the bottom layer; multi -character -to -shape adjustment is better;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Select the bottom layer, click text> to convert to shape, and transform the text into shape;

PS教程:铝膜气球3D字,立体字体制作的完整教程

Select the path to select tools, click the outline of the mouse; (for the difference, the upper text is changed to gray)

PS教程:铝膜气球3D字,立体字体制作的完整教程

Select the tools directly, drag the path out, the corner, adjust the curve slightly;

After all the expansion is completed, the following figure is obtained.

After the upper text is changed back to the pink, the effect of the two layers of text is as shown below;

3. Make the edge of the underlying text;

The uneven effect, this effect uses filters> distorted> ripples, the number and size can be adjusted, as shown below.

4. Step 6 according to the steps of the single word, make the underlying metal luster and high -gloss area.

PS教程:铝膜气球3D字,立体字体制作的完整教程

5. Display the upper layer text, such as the 7th step of the single layer, regulate the light of the edge, select the pink at the bottom of the color, and the parameter imitation of the seventh step of the single layer.

PS教程:铝膜气球3D字,立体字体制作的完整教程

6. Upper -layer text, click the filter> Filter Library> Ocean ripples, adjust parameter 4, so that the middle reflector with some ripples, not too smooth.

PS教程:铝膜气球3D字,立体字体制作的完整教程

7. Also produce two layers of aluminum film metal luster effects. In order to light up, the upper layer superimposed method is selected. The overall figure is as shown below.

PS教程:铝膜气球3D字,立体字体制作的完整教程

Put the aluminum film balloon font into the scene, the final renderings are shown below.

You might also enjoy: