In order to charging conveniently, many people will prepare a data cable in the company, home, and the car, but as the Type-C interface popularizes, the original Micro USB data cables after Type-C mobile phone are all invalidated, and all of a sudden You have to buy a lot of Type-C data cables. So the question is, what kind of Type-C data cable is reliable? To answer this question, we bought four Type-C data cables for comparative tests. After reading it, I promise to know which one to buy.
The data cable must have to buy the durable type, otherwise it will not be charged when you are in a hurry. A strong data cable first depends on its outer quilt. The common outer materials are PVC, TPE, nylon, etc. The PVC material is hard and poorly elastic, and many cheap data cables are like this; TPE materials are used more on the original data line, flexible and good, but still not strong enough; Materials, feel, and texture must be a grade.
In the four data cables, ASZUNE and Pin Sheng are made of PVC. BESITER is TPE material. Bulls are made of light silk nylon materials. Essence
In addition to the different materials, the interface shells of Type-C head and USB-A head are also sophisticated. Obviously, only the bulls are made of aluminum alloy in the four data cables, and the anode oxidation, sandblasting and other processes are also used on it. The feel is very delicate, forming obvious contrast with several other data cables.
The plug is the most vulnerable part of the data cable, so more “care” is needed. The mesh design of the four data cables is very different. The bull’s mesh protective cover is the longest. During the bending process, the plug and the data cable will not bear too much pressure. In contrast, the other three data cables will The mesh protective cover is significantly shorter.
In the process of comparison, it was found that the Type-C head that looked the same is different in design. The Bull’s Type-C head uses an integrated design, so there are no traces of stitching, and the other three data cables are formed by stitching. To sum up in one sentence, see the true chapter!
Magnet adsorption test
The difference between the USB-a male is mainly reflected in the materials. The Bull Type-C woven data cable is made of 304 stainless steel. The advantage is that the corrosion resistance is better, and other data cables are generally used in the Magou iron material. Take a magnet for adsorption to verify this.
According to the normal process, the charging test should be performed below, but considering that there are some data cables, they just bought them normally, and it suddenly breaks after a few days.
The mobile phone used by the charging test is Xiaomi Note3. This phone supports QC3.0, with a maximum 18W fast charging, which has high requirements for the carrying capacity of the charging data cable. (Use mobile phone original loader, the remaining power is 60%)
The current reaches 2.38A when charging the BESITER data cable.
Pin Sheng is basically no different from Besiter, and the current is 2.38A.
The charging current of the Bull Type-C woven data cable is 2.43A, which is higher than the above two.
Unsurprisingly, after some torture, the data cable has already been hung up. The use of the aszune data cable is completely unable to enter the electricity, and it is scrapped directly!
As a result, the Bull’s Type-C data cable is even better in charging speed. The performance of BESITER and Pin Sheng belongs to the normal category. The most embarrassing is Aszune. After experiencing the tunnel test Importance!
Finally, we will disassemble the four data cables. The internal differences are much larger than expected. We must take a closer look.
Cut the four data cables and cut off
Here we briefly introduce the composition of the next data cable. One data cable is generally composed of four or five lines. Among them Negative lines and ground lines. After peeling the outside, you can see that Besiter, Pin Sheng and Aszune are composed of four lines, and the internal structure of the bull is much more complicated than them!
Seeing this, what kind of Type-C data cable should be bought, you must have the answer, but the disassembly has not ended. Next, see if the Type-C head can also have such obvious differences.
The Type-C head disassembly process is not smooth. Because the Bull’s Type-C head is made of aluminum alloy, I don’t know where to start when disassembling. There is no problem even if it is crushed in the normal use process. In contrast, the other three data cable plastic shells are easier to disassemble.
The Type-C head of aluminum alloy shell is difficult to disassemble
Type-C head after disassembly
If you carefully compare the circuit board of the Bull Type-C data cable, there is something more-thermal protection resistance is the role of thermal protection resistance. It is to stop the charging process when the charging process occurs during the charging process to avoid abnormal charging. Dear damage to the device. At this point, it can be seen that the Bull Type-C data cable is carefully designed from the inside to the inside out, and some cheap or even the original data cable cannot reach such a standard.
From the above comparison test, it can be seen that the different Type-C data cables are very different. In addition to the different product workmanship, the charging speed and the core structure are divided into high. Do not buy one to use it. Among the four products participating in the comparison test, the Bull Type-C knitting line is undoubtedly the most recommended. Except for the high-value nylon weaving, the workmanship is excellent, especially the details of the details are currently worth buying A good line.
Editor in this article: Li Fusheng
Pay attention to bubble nets and enjoy scientific and technological life.