First of all, before starting today’s topics, let’s talk about the conceptual issues that are always talking about. In the past, we have been separating the toilet for a glass partition for a glass partition, which is called wet and wet separation. That is most of the decoration only takes care of it or the protection of the toilet. It is what everyone said to move out.

▲ As shown in the figure, this is the past dry and wet separation. The shower is partitioned to prevent water splashing. At the same time, it protects the toilet. In the past, it was called dry and wet separation. Even many designers are now called dry and wet separation. This approach is not a child that can be achieved in every family. Have a bathtub and shower room? “


▲ The real wet and wet separation is about the above approach, that is, the practice of the bath cabinet movement, the reason is very simple. Let us use the toothbrushes towels every day away from the toilet, which is conducive to health. This is the highest standard for staying in.


When some buying a house, the pattern itself is the separation of wet and wet, which just meets the check -in, but some patterns are not separated from wet and wet, and partitions need to be divided later. At this time, which material is best used in the partition of the wet and wet zone.


First, direct brick.


This is most of the approach, which is stronger. It is much better to prevent water vapor and humidity, and it can be completely separated by space.

▲ As shown in the figure, most of the long bathrooms can be achieved. Newly built wall red brick practices, the wet area is divided by glass, the flat door sealing effect is good, and the metal door prevents humidity and deformation. At the same time, the method of Changhong glass and sandblasting is used to ensure that the lighting can be perfectly achieved. , Separate toiletries from the toilet

▲ For the walls outside the dry area, there are five common practices in the above five types of practices, and you need to determine the practice according to the space and the overall pattern; if the wet and wet separation is separated, the bath cabinet becomes smaller, you can use the second method of the picture above and smash it off. The outer wall is used to expand the size of the bath cabinet; if there is a privacy and the space is large enough, you can use several other methods.

Second, pure glass partition.

This is similar to the first type, that is, no red brick, but all in the form of glass partition to meet the needs of dry and wet separation

▲ As shown in the figure, the glass is used instead of red bricks as partition walls, while meeting the functional separation and lighting. It is also possible, but the privacy, including the conclusion, is not durable, and the cost is much higher than the red brick wall tiles.

There are two methods. The shower inside has a special partition or shower room. You can directly spread the wall tiles. You do n’t need to cross the door stone.

If there is no shower room or cannot make a shower room, you must add the door stone to the partition above.

The practice of segmentation is used to ensure the normal water flow of the wet area, and it is completely closed with the wet area.

Third, local wall+glass partition


This approach is well understood, that is, combining the first and second types, using the form of local walls and glass to meet the function of wet and wet separation.

▲ As shown in the figure, the local half wall design, the large area of ​​the door connection window can also meet the perfect dry and humid separation. The advantage is that the lighting is more transparent. It is more expensive than the red brick wall. In the same way, the wet zone can achieve separate shower segmentation, and the ground can be paved. Otherwise, there must be door stone segmentation space under the door joint window.

Original album catalog, constantly update 12.29

You might also enjoy: